Priority parameters list#
To send photo images to the LUNA PLATFORM, first of all, you need to configure FaceStream to work with faces or bodies (see parameters for switching detection mode below), as well as configure the basic parameters necessary for the correct operation of the application. All parameters are separated as follows:
-
FaceStream parameters are set in the in the "FACE_STREAM_CONFIG" section in the Configurator or in the "fs3config.conf" configuration file.
-
Streams management parameters are set in a request with a body in JSON format to the "/streams" resource.
-
TrackEngine parameters are set in the in the "TRACK_ENGINE_CONFIG" section in the Configurator or in the "trackengine.conf" configuration file.
See the detailed description of the parameters listed below in the relevant sections.
The following common parameters are available for sending both faces and bodies:
FaceStream parameters
| Parameter | Description |
|---|---|
| sending > async_requests | Enables you to switch between asynchronous and synchronous request sending modes in LUNA PLATFORM |
| sending > send_source_frame | Enables sending the source frame to LUNA PLATFORM |
| sending > jpeg_quality_level | Enables you to set the compression ratio of the source frame |
Streams management parameters
| Parameter | Description |
|---|---|
| event_handler > frame_store | Enables you to set the URL of the Image Store service to send the source frame |
Parameters for sending faces#
The parameters for sending face images to LUNA PLATFORM 5 are listed below.
TrackEngine parameters
| Parameter | Description |
|---|---|
| use-face-detector | Enables face detection - 1 |
| use-body-detector | Enables body detection - 0 |
FaceStream parameters
| Parameter | Description |
|---|---|
| lunastreams > api_version | The version of the API of the LUNA Streams service - 1 |
| lunastreams > origin | Full network path to LUNA Streams service |
| sending > request_type | Request type for sending images to LP - jpeg |
| sending > portrait_type | Image transfer format - warp |
| sending > aggregate_attr_requests | Enables aggregation of the best shots to get a single descriptor in LUNA PLATFORM - true or false |
Streams management parameters
| Parameter | Description |
|---|---|
| data > type | Type of signal source (tcp, udp, videofile, images) - string |
| account_id | "Luna_account_id", to which the request is related - string in UUID format |
| event_handler > origin | full network path to LP 5 - "http://luna_api_address:5000/". The example specifies the port "5000" for the API service, which is used by default |
| event_handler > api_version | The version of the API of the LP API service - 6 |
| event_handler > bestshot_handler > handler_id | LP handler that enables you to flexibly configure the faces processing - string in UUID format |
For detailed information about the handlers, see the documentation APIReferenceManual.html included in the LUNA PLATFORM 5 distribution package.
Parameters for sending bodies#
The parameters for sending body images to LUNA PLATFORM 5 are listed below.
TrackEngine parameters
| Parameter | Description |
|---|---|
| use-face-detector | Enables face detection - 0 |
| use-body-detector | Enables body detection - 1 |
FaceStream parameters
| Parameter | Description |
|---|---|
| lunastreams > api_version | The version of the API of the LUNA Streams service - 1 |
| lunastreams > origin | Full network path to LUNA Streams service |
| sending > aggregate_attr_requests | Enables aggregation of the best shots to get a single descriptor in LUNA PLATFORM - true or false |
| sending > minimal_body_track_length_to_send | This parameter enables the sending of detections with the coordinates of the human body - x, y, width and height and sets the number of detections, less than the value of which they will not be sent - 3 |
| sending > detection_path_length | This parameter sets the maximum number of detections for the "minimal_body_track_length_to_send" parameter. - 100 |
Streams management parameters
| Parameter | Description |
|---|---|
| data > type | Type of signal source (tcp, udp, videofile, images) - string |
| account_id | "Luna_account_id", to which the request is related - string in UUID format |
| event_handler > origin | full network path to LP 5 - "http://luna_api_address:5000/". The example specifies the port "5000" for the API service, which is used by default |
| event_handler > api_version | The version of the API of the LP API service - 6 |
| event_handler > bestshot_handler > handler_id | LP handler that enables you to flexibly configure the processing of bodies - string in UUID format |
For detailed information about the handlers, see the documentation APIReferenceManual.html included in the LUNA PLATFORM 5 distribution package.