Skip to content

System requirements#

To successfully install and run the system, your hardware must meet the minimum requirements specified below.

Minimum system requirements for x64 architecture#

Required Resource

Recommended

Processor

Intel(R) Core(TM) i3-10110U

RAM

4GB or more

Hard disk drive

HDD or SSD at least 1,4 B

Operating system

  • Windows 10 (64 bit)

  • Ubuntu 24.04 x64

  • Debian 10 x64

Instruction Support

Advanced Vector Extensions 2 (AVX2)

To run the application on Windows, install the Visual C++ Redistributable package.

Minimum system requirements for ARM architecture#

Required Resource

Recommended

Processor

Rockchip RK3588S

RAM

4GB or more

Hard disk drive

HDD or SSD at least 128GB

Operating system

Armbian 23 (aarch64)

Supported cameras#

The system is optimized and tested for reliable operation with the following 3D and IR cameras:

  • Intel® RealSense™ Depth cameras:
    • D415
    • D435
    • D435j
    • D455
  • VLS LUNA CAMERA:
    • VLS LUNA CAMERA 3D / VLS LUNA CAMERA 3D Embedded
    • VLS LUNA CAMERA 2D
  • Orbbec cameras:
    • Gemini E
    • Gemini 335

Important: Before using Orbbec cameras with LUNA KIOSK, ensure that the official Orbbec driver is installed on the target system. Without the driver, the camera may not be recognized by the operating system or the SDK. Refer to the Orbbec Developer Portal for the latest driver packages and installation instructions.

Note: For information about VLS LUNA CAMERA 3D / VLS LUNA CAMERA 3D Embedded, please contact your VisionLabs representative.

Connection requirements#

For stable performance, connect all supported cameras using USB 3.0.

Orbbec and Intel RealSense SDK compatibility#

This section provides compatibility information for Orbbec and Intel RealSense SDKs with their respective hardware and operating systems.

Orbbec SDK v.1.10.27#

  • Hardware compatibility:
    • Gemini E
    • Gemini 335
  • Firmware requirements:
    • Minimum firmware version: 1.6.00
  • Operating system support:
    • Windows:
      • Windows 10 or later
      • Architecture: x86 and x64
    • Linux:
      • Architecture: x64 only
      • Recommended distributions:
        • Ubuntu 20.04 LTS
        • Ubuntu 22.04 LTS
        • Ubuntu 24.04 LTS

Orbbec SDK v.2.5.5#

  • Hardware compatibility:
    • Gemini E
    • Gemini 335
  • Firmware requirements:
    • Minimum firmware version: 1.6.00
  • Operating system support:
    • Windows:
      • Windows 10 or later
      • Architecture: x64 only
    • Linux:
      • Architecture: x64 only
      • Recommended distributions:
        • Ubuntu 20.04 LTS
        • Ubuntu 22.04 LTS
        • Ubuntu 24.04 LTS

Intel RealSense SDK v.2.56.5#

  • Hardware compatibility:
    • Cameras:
      • Intel RealSense D415
      • Intel RealSense D435i
      • Intel RealSense D435
  • Firmware requirements:
    • Minimum firmware version: 5.17.0.10
  • Operating system support:
    • Windows:
      • Supported versions:
        • Windows 11
        • Windows 10 (Build 15063 or later)
      • Recommended configurations:
        • Windows 10 RS5 (Redstone 5)
        • Windows 11 KB5030219 (OS Build 22621.2283 or later)
        • Build 17763+ recommended for all installations
    • Linux:
      • Supported distributions:
        • Ubuntu 20.04 LTS
        • Ubuntu 22.04 LTS
        • Ubuntu 24.04 LTS
        • Non-LTS distributions are not supported
      • Kernel versions:
        • 6.[2, 5, 8]
        • 5.[0, 3, 4, 8, 13, 15, 19]

Hardware restrictions#

The following Intel chipsets are not supported:

Intel Chipset Series PCH Chip-ID Compatible CPUs
300 Series/C240 9DED, A36D 8th/9th Generation Core Mobile/Desktop
600 Series 51ED 12th Generation Core Mobile