"Operator panel" section#

The “Operator panel” section displays face recognition events (Figure 7). The section displays the last 30 events within the settings of handling policy for processing incoming images of the video stream. Receiving and displaying events is performed with minimal delays in near real time.

Click the “Get events” switch (1) to show events received via the WebSocket protocol. Click on the "Filters" button (2) to filter events by parameters (for more details, see the "Filtering events" section).

The page shows the last event data (3). An event can be either a face detection or video analytics "People Count", "Fight", "Weapon" and "Fire" (Figure 8).

Section "Operator Panel", "Fire" video analytics event

Photo image from a video stream;
"Source"—the name of the event source that recorded the event;
“Place”—location of the event—house number, street, city, district, area;
For face detection events:
Top match is the reference photo image of the face. If no matches are found for a photo from an event, then the column with the top match for this event will remain empty.
Value of similarity of the identified face with the reference (in percentage terms and with the color coding of similarity thresholds*);
"Date created"—the date and time the event was recorded;
“Person ID”—the identifier of a person card from the control list. The value is displayed if such an ID is present;
"User data"—information from the database, linked to a person from the control list;
“Lists”—the name of the lists (list) to which the person is attached;
For video analytics events:
"Date created" and "Date ended"—the date and time of the start and end of the event;
"Event type"—takes values of "People Count", "Fire", "Weapon", "Fight";
For a people counting event, user sees information about the number of people detected in the processed video segment;
For a fire detection event, user sees the probability of fire in the frame is displayed in percentage, as well as information about the fire class, such as "Black Smoke", "White Smoke", "Fire";
For a weapon detection event, user sees the probability of weapon in the frame in percentage;
For a fight detection event, user sees the probability of fight in the frame in percentage;

* The color coding of similarity thresholds is configured in the config.json configuration file (see Luna POINT. Administration Manual).:

similarity values below “low” will be marked in red;
similarity values between “low” and “medium” will be marked in yellow;
similarity values above “medium” will be marked in green.

When you click on a block with an event on the right, the event details open.

Event details in the operator panel#

Event details are divided into four blocks and contain information about the date and location of the event, a photo of a full frame of the event, a map and video stream of the event, a summary of the match, as well as information about last events with the person from the card (for face detection event).

In the figure, blocks of event details are highlighted with numbers 1-4 (Figure 9). Description of the blocks are presented in tables (Tables 2-5)

Table 2. Elements of the first (1) block of event details: detailed information about the event depending on the type of event

Title	Event Type	Description
"Date created"	Face detection	Date and time the event was recorded
"Date created" and "Date ended"	All video analytics	Date and time of event start and end
"Source"	All events	Name of the source that recorded the event, indicating the event location—house number, street, city, district, area
"Download sample" button	Face detection	When clicked, a sample is downloaded—centered cropped photo of face from event
"Download full frame" button	All events	When clicked, a full frame of the video stream, on which the event was recorded, is downloaded
"Add to card" button	Face detection	When clicked, the "Add to card" window opens. Here the user can add a sample to the person card by filling out the following fields: Card ID—ID of the existing or the new person card, to which photo will be added; Add face to lists—a list or lists to which the photo will be added. After completing the fields, click the "Save" button and the sample will be attached to the specified card and lists
"Search" button	Face detection	When clicked, the user goes to the "Search" page, where the search results by current event ID are shown
"Time from video start"	All video analytics	Information about the time corresponding to the frame where the video analytics event was recorded
"Maximum number of people"	"People count" video analytics	Maximum number of people detected in the processed video segment
"Fight score"	"Fight" video analytics	The probability of a fight in the frame in percent
"Weapon score"	"Weapon" video analytics	The probability of a weapon in the frame in percent
"Fire score"	"Fire" video analytics	The probability of a fire in the frame in percent
"Fire class"	"Fire" video analytics	Information about the type of fire, such as "Black smoke" or "Fire"
"Alarm" button	All video analytics	When pressed, a notification is sent to the security system service to activate the response team. To configure the alarm button in the interface, see "LUNA POINT. Administrator guide", "Setting up an alarm button in the "Operator panel" section

Table 3. Elements of the second (2) block of event details: video stream from the event site and a map with the geotag of the event

Name	Description
Map	Цhen clicked, a map indicating the geotag of the event is shown Allows user to track a person's movement on the map in face detection events
Video stream (active only for face detection events)	When clicked, a video stream from the source that recorded the event is shown Allows you to track the movement of a person on the camera from a video stream

Table 4. Elements of the third (3) block of event details—for face detection events: information about the person whose face matched the detected face

Name	Description
Open card	A button that, when clicked, takes you to the person card page, where you can view all faces similar to the reference (for more details, see the "Idex card" section)
Similarity percentage	Value of similarity of the identified face with the reference in percentage terms and with the color coding of similarity thresholds;
Date created	Date and time of creation of the biometric sample with whom the identification event occurred
Lists	List of lists to which the reference is attached
Files	Files and documents attached to the person whose face was in the event

Table 5. Elements of the fourth (4) block of event details—for face detection events: list of lasts events with a person from the card

Name	Description
Photos of the event	Photo of a face from a video stream
Similarity percentage	The value of the degree of similarity of the identified face with the face from the card in percentage and with the color designation of similarity thresholds
Date	Date and time the event was recorded
Source	Name of the source that recorded the event
Location	Event location—house number, street, city, district, area

An external ID is used to integrate LUNA POINT with external systems, to transfer data to other systems for the purpose of analysis and for the rapid response to an event.

Filtering events#

User can quickly find an event among the last 30, as well as set a limit for displaying new events on the screen using filters. When a user clicks on the "Filter" button in the “Operator panel” page, a menu with settings and filters opens (Figure 10).

Selecting filters in the “Operator panel” section

The number next to the icon shows the number of applied filters. A short description of the elements and parameters of the filter block on the “Operator panel” page is presented in the table (Table 6).

Table 6. Filters available to the user to search for last events

Name	Description
General	Filters applied to face detection events
Source	Select one or more sources from the list of available ones
Handling policies	Handling policy names, according to which the face in the image was processed. One or several handling policies can be selected for searching
Gender	Gender of a person to be detected: Female; Male; Not estimated;
Age category	Lower and/or upper limits of age of a person to be detected: Under 18; From 18 to 44; 45 to 60; Over 60;
Similarity,%	Lower and/or upper limits of similarity for displaying faces identified by the lists
Video analytics	Filters applied to events of video analytics
People count	Filters applied to events of "People count" video analytics
Source	Select one or more sources from the list of available ones
Count of people	Maximum number of people detected in the processed video segment
Fight	Filters applied to events of "Fight" video analytics
Source	Select one or more sources from the list of available ones
Fight score, %	The probability of a fight in the frame in percent
Weapon	Filters applied to events of "Weapon" video analytics
Source	Select one or more sources from the list of available ones
Weapon score	The probability of a weapon in the frame in percent
Fire	Filters applied to events of "Fire" video analytics
Source	Select one or more sources from the list of available ones
Fire score	The probability of a fire in the frame in percent

The user selects one filter or a combination of filters and clicks on the “Filter” button for the applied filters to be applied. The applied filters will affect the appearance of new events on the screen.

To reset the applied filters, click on the “Reset” button.