Services launch#

This section gives examples for:

Databases tables creation
Buckets creation
Launching of containers

LUNA PLATFORM services must be launched in the following sequence:

Databases, Balancers, HASP service and other third-party party software
Configurator
Image Store
Accounts
Licenses
Faces
Events
Python Matcher
Python Matcher Proxy. The service is disabled by default.
Handlers
Tasks
Sender
API
Admin

The following service are used when emulation of LUNA PLATFORM 3 is required only:

The following service are used when emulation of LUNA PLATFORM 4 is required only:

It is recommended to launch containers one by one and wait for the container status to become "up" (use the docker ps command).

Some of these services are optional and you can disable their use. It is recommended to use Events, Tasks, Sender and Admin services by default. See the "Optional services usage" section for details.

When launching each service, certain parameters are used, for example, --detach, --network, etc. See the section "Launching parameters description" for more detailed information about all launch parameters of LUNA PLATFORM services and databases.

See the "Docker commands" section for details about working with containers.

Monitoring configuration#

Monitoring LUNA PLATFORM services requires running the Influx 2.0.8-alpine database. Below are the commands to launch the Influx container.

For more information, see the "Monitoring" section in the administrator manual.

If necessary, you can configure the visualization of monitoring data using the LUNA Dashboards service, which includes a configured Grafana data visualization system. In addition, you can launch the Grafana Loki tool for advanced work with logs. See the instructions for launching LUNA Dashboards and Grafana Loki in the "Monitoring and logs visualization using Grafana" section.

InfluxDB OSS 2#

Note! If you already have InfluxDB 2.0.8-alpine installed, skip this step.

Use the docker run command with these parameters:

docker run \
-e DOCKER_INFLUXDB_INIT_MODE=setup \
-e DOCKER_INFLUXDB_INIT_BUCKET=luna_monitoring \
-e DOCKER_INFLUXDB_INIT_USERNAME=luna \
-e DOCKER_INFLUXDB_INIT_PASSWORD=password \
-e DOCKER_INFLUXDB_INIT_ORG=luna \
-e DOCKER_INFLUXDB_INIT_ADMIN_TOKEN=kofqt4Pfqjn6o0RBtMDQqVoJLgHoxxDUmmhiAZ7JS6VmEnrqZXQhxDhad8AX9tmiJH6CjM7Y1U8p5eSEocGzIA== \
-v /etc/localtime:/etc/localtime:ro \
-v /var/lib/luna/current/example-docker/influx:/var/lib/influxdb2 \
--restart=always \
--detach=true \
--network=host \
--name influxdb \
dockerhub.visionlabs.ru/luna/influxdb:2.0.8-alpine

If you need to set the custom settings of the Influx DB (for example, set the IP address and port when launching Influx on separate server), then you need to change them in the configurations of each LUNA PLATFORM service. See the section "Set custom Influx settings" for more information.

Run third-party services#

This section describes the launching of databases and message queues in docker containers. They must be launched before LP services.

PostgreSQL#

If you already have PostgreSQL installed, skip this step.

Use the following command to launch PostgreSQL.

docker run \
--env=POSTGRES_USER=luna \
--env=POSTGRES_PASSWORD=luna \
--shm-size=1g \
-v /var/lib/luna/current/example-docker/postgresql/data/:/var/lib/postgresql/data/ \
-v /var/lib/luna/current/example-docker/postgresql/entrypoint-initdb.d/:/docker-entrypoint-initdb.d/ \
-v /etc/localtime:/etc/localtime:ro \
--name=postgres \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/postgis-vlmatch:12

-v /var/lib/luna/current/example-docker/postgresql/entrypoint-initdb.d/:/docker-entrypoint-initdb.d/ \ - the "docker-entrypoint-initdb.d" script includes the commands for the creation of services databases. During database creation, a default username and password are automatically used.

-v /var/lib/luna/current/example-docker/postgresql/data/:/var/lib/postgresql/data/ - the volume command enables you to mount the "data" folder to the PostgreSQL container. The folder on the server and the folder in the container will be synchronized. The PostgreSQL data from the container will be saved to this directory.

--network=host - if you need to change the port for PotgreSQL, you should change this string to -p 5440:5432. Where the first port 5440 is the local port and 5432 is the port used inside the container.

Note! You should create all the databases for LP services manually if you are going to use an already installed PostgreSQL.

Redis#

If you already have Redis installed, skip this step.

Use the following command to launch Redis.

docker run \
-v /etc/localtime:/etc/localtime:ro \
--name=redis \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/redis:7.0.5-alpine3.16

Configurator#

Optional services usage#

The listed below services are not mandatory for LP. You can disable them if their functionality is not required for your tasks.

Use the "ADDITIONAL_SERVICES_USAGE" section in the API service settings in the Configurator service to disable unnecessary services.

Optional services

Service	Dependent services
Events	API, Admin, Handlers, Tasks.
Tasks	API, Admin, Handlers
Sender	API, Admin, Handlers
Python Matcher Proxy (disabled by default)	API, Admin, Handlers, Tasks.

The API service does not depend on the state of the Admin, Backport3, Backport4, User Interface 3 and User Interface 4 services. These services do not need to be changed in the Configurator service, it is enough just not to launch them.

You can use the dump file provided in the distribution package to enable/disable services from the "Optional services" table before Configurator launch.

vi /var/lib/luna/current/extras/conf/platform_settings.json

You must restart a dependent service after changing its parameters if the service was already launched.

Configurator DB tables creation#

Use the docker run command with these parameters to create the Configurator database tables.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /var/lib/luna/current/example-docker/luna_configurator/configs/luna_configurator_postgres.conf:/srv/luna_configurator/configs/config.conf \
-v /var/lib/luna/current/extras/conf/platform_settings.json:/srv/luna_configurator/used_dumps/platform_settings.json \
--network=host \
-v /tmp/logs/configurator:/srv/logs \
--rm \
--entrypoint bash \
dockerhub.visionlabs.ru/luna/luna-configurator:v.2.1.5 \
-c "python3 ./base_scripts/db_create.py; cd /srv/luna_configurator/configs/configs/; python3 -m configs.migrate --config /srv/luna_configurator/configs/config.conf head; cd /srv; python3 ./base_scripts/db_create.py --dump-file /srv/luna_configurator/used_dumps/platform_settings.json"

/var/lib/luna/current/extras/conf/platform_settings.json - enables you to specify the path to the dump file with LP configurations.

./base_scripts/db_create.py; - creates database structure.

python3 -m configs.migrate head; - performs settings migrations in Configurator DB and sets revision for migration. The revision will be required during the upgrade to the new LP5 build.

--dump-file /srv/luna_configurator/used_dumps/platform_settings.json - updates settings in the Configurator DB with values from the provided file.

Run Configurator container#

Use the docker run command with these parameters to launch Configurator:

docker run \
--env=PORT=5070 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /var/lib/luna/current/example-docker/luna_configurator/configs/luna_configurator_postgres.conf:/srv/luna_configurator/configs/config.conf \
-v /tmp/logs/configurator:/srv/logs \
--name=luna-configurator \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-configurator:v.2.1.5

At this stage, you can activate logging to file if you need to save them on the server (see the "Logging to server" section).

Image Store#

Image Store container launch#

Use the following command to launch the Image Store service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5020 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /var/lib/luna/current/example-docker/image_store/:/srv/local_storage/ \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/image-store:/srv/logs \
--name=luna-image-store \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-image-store:v.3.8.2

-v /var/lib/luna/current/example-docker/image_store/:/srv/local_storage/ - the data from the specified folder is added to the Docker container when it is launched. All the data from the specified Docker container folder is saved to this directory.

If you already have a directory with LP buckets you should specify it instead of /var/lib/luna/current/example-docker/image_store/.

Buckets creation#

Buckets are required to store data in Image Store. The Image Store service should be launched before the commands execution.

When upgrading from the previous version, it is recommended to launch the bucket creation commands one more time. Hence you make sure that all the required buckets were created.

If the "error_code":13006,"desc":"Unique constraint error","detail":"Bucket with name 'task-result' already exist"} error appears during launching of the listed above commands, the bucket is already created.

There are two ways to create buckets in LP.

Run the listed below scripts to create buckets

Run this script to create general buckets:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/api:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-api:v.6.13.2 \
python3 ./base_scripts/lis_bucket_create.py -ii --luna-config http://localhost:5070/1

If you are going to use the Tasks service, use the following command to additionally create the "task-result" in the Image Store service:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.14.2 \
python3 ./base_scripts/lis_bucket_create.py -ii --luna-config http://localhost:5070/1

If you are going to use the portraits, use the following command to additionally create the "portraits".

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/api:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport3:v.0.7.2 \
python3 ./base_scripts/lis_bucket_create.py -ii --luna-config http://localhost:5070/1

Use direct requests to create required buckets.

The curl utility is required for the following requests.

The "visionlabs-samples" bucket is used for face samples storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-samples

The "portraits" bucket is used for portraits storage. The bucket is required for Backport 3 utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=portraits

The "visionlabs-bodies-samples" bucket is used for human bodies samples storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-bodies-samples

The "visionlabs-image-origin" bucket is used for source images storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-image-origin

The "visionlabs-objects" bucket is used for objects storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-objects

The "task-result" bucket for the Tasks service. Do not use it if you are not going to use the Tasks service.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=task-result

Accounts#

Accounts DB creation#

Use the following command to create Accounts DB tables:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/accounts:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-accounts:v.0.1.2 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Accounts container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5170 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/accounts:/srv/logs \
--name=luna-accounts \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-accounts:v.0.1.2

Licenses#

Specify license server address using Configurator#

Note. Do not perform the steps below if you have already specified the license server address in the "Specify license server address using dump file" section.

To set the license server address, follow these steps:

go to the Configurator service interface http://<configurator_server_ip>:5070/
specify the "LICENSE_VENDOR" value in the "Setting name" field and click "Apply Filters"
set the IP address of the server with your HASP key in the field "server_address"
click "Save"

Licenses container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5120 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/licenses:/srv/logs \
--name=luna-licenses \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-licenses:v.0.6.3

Faces#

Faces DB tables creation#

Use the following command to create the Faces DB tables:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/faces:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-faces:v.4.8.2 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Faces container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5030 \
--env=WORKER_COUNT=2 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/faces:/srv/logs \
--name=luna-faces \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-faces:v.4.8.2

Events#

Events DB tables creation#

Note. If you are not going to use the Events service, do not launch this container and disable the service utilization in Configurator. See section "Optional services usage".

Use the following command to create the Events DB tables:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/events:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-events:v.4.8.2 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Events container launch#

Note. If you are not going to use the Events service, do not launch this container and disable the service utilization in Configurator. See section "Optional services usage".

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5040 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/events:/srv/logs \
--name=luna-events \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-events:v.4.8.2

Python Matcher services#

For matching tasks, you can use either only the Python Matcher service, or additionally use the Python Matcher Proxy service, which redirects matching requests to either the Python Matcher service or matching plugins. This section describes how to use Python Matcher without Python Matcher Proxy.

Note. You need to use the Python Matcher Proxy service only if you are going to use matching plugins. Using Python Matcher Proxy and running the corresponding docker container are described in the "Use Python Matcher with Python Matcher Proxy" section.

See the description and usage of matching plugins in the administrator manual.

Use Python Matcher without Python Matcher Proxy#

The Python Matcher service with matching by the Faces DB is enabled by default after launching.

The Python Matcher service with matching by the Events is also enabled by default. You can disable it by specifying USE_LUNA_EVENTS = 0 in the ADDITIONAL_SERVICES_USAGE settings of Configurator (see "Optional services usage" section). Thus, the Events service will not be used for LUNA PLATFORM.

The Python Matcher that matches using the matcher library is enabled when CACHE_ENABLED is set to "true" in the DESCRIPTORS_CACHE setting.

Note. A single image is downloaded for the Python Matcher service and the Python Matcher Proxy service.

Python Matcher container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5100 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/python-matcher:/srv/logs \
--name=luna-python-matcher \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-python-matcher:v.1.4.2

Handlers#

Handlers DB tables creation#

Use the following command to create the Handlers DB tables:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/handlers:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-handlers:v.2.16.2 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Handlers container launch#

You can run the Handlers service utilizing CPU (set by default) or GPU.

By default, the Handlers service is launched with all estimators and detectors enabled. If necessary, you can disable the use of some estimators or detectors when launching the Handlers container. Disabling unnecessary estimators enables you to save RAM or GPU memory, since when the Handlers service launches, the possibility of performing these estimates is checked and neural networks are loaded into memory. If you disable the estimator or detector, you can also remove its neural network from the Handlers container. See the "Enable/disable several estimators and detectors" section of the administrator manual for more information.

Run the Handlers service using one of the following commands according to the utilized processing unit.

Run Handlers utilizing CPU#

Use the following command to launch the Handlers service using CPU:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5090 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/handlers:/srv/logs \
--name=luna-handlers \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-handlers:v.2.16.2

Run Handlers utilizing GPU#

The Handlers service does not utilize GPU by default. If you are going to use the GPU, then you should enable its use for the Handlers service in the Configurator service.

If you need to use the GPU for all estimators and detectors at once, then you need to use the global_device_class parameter in the "LUNA_HANDLERS_RUNTIME_SETTINGS" section. All estimators and detectors will use the value of this parameter if the device_class parameter of their settings like "LUNA_HANDLERS__SETTINGS.runtime_settings" is set to global (by default for all estimators and detectors).

If you need to use the GPU for a specific estimator or detector, then you need to use the device_class parameter in sections like "LUNA_HANDLERS__SETTINGS.runtime_settings".

See section "Calculations using GPU" for additional requirements for GPU utilization.

Use the following command to launch the Handlers service using GPU:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5090 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--gpus device=0 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/handlers:/srv/logs \
--name=luna-handlers \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-handlers:v.2.16.2

--gpus device=0 - the parameter specifies the used GPU device and enables GPU utilization. A single GPU can be utilized per Handlers instance. Multiple GPU utilization per instance is not available.

Tasks#

Note. If you are not going to use the Tasks service, do not launch the Tasks container and the Tasks Worker container. Disable the service utilization in Configurator. See section "Optional services usage".

Tasks DB tables creation#

Use the following command to create Tasks DB tables:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.14.2 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Tasks and Tasks worker containers launch#

Luna Tasks Docker image includes the Tasks service and the Tasks worker. They both must be launched.

The "task-result" bucket should be created for the Tasks service before the service launch. The buckets creation is described in the "Buckets creation".

If it is necessary to use the Estimator task using a network disk, then you should first mount the directory with images from the network disk into special directories of Tasks and Tasks Worker containers. See the "Estimator task" section in the administrator manual for details.

Tasks Worker launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5051 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--env=SERVICE_TYPE="tasks_worker" \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks-worker:/srv/logs \
--name=luna-tasks-worker \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.14.2

Tasks launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5050 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks:/srv/logs \
--name=luna-tasks \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.14.2

Sender#

Sender container launch#

Note. If you are not going to use the Sender service, do not launch this container and disable the service utilization in Configurator. See section "Optional services usage".

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5080 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/sender:/srv/logs \
--name=luna-sender \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-sender:v.2.6.2

API#

API container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5000 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--name=luna-api \
--restart=always \
--detach=true \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/api:/srv/logs \
--network=host \
dockerhub.visionlabs.ru/luna/luna-api:v.6.13.2

Account creation using API service#

The account is created using an HTTP request to the "create account" resource of the API service.

You can also create an account using the Admin service. This method requires an existing login and password (or the default login and password) and enables you to create an "admin" account. See the "Admin service" section of the administrator manual for details.

To create the account using a request to the API service, you need to provide the following mandatory data:

login — email address
password — password
account_type — account type ("user" or "advanced_user")

Create the account using your authentication details.

Example of CURL-request to the "create account" resource:

curl --location --request POST 'http://127.0.0.1:5000/6/accounts' \
--header 'Content-Type: application/json' \
--data '{
  "login": "user@mail.com",
  "password": "password",
  "account_type": "user",
  "description": "description"
}'

It is necessary to replace the authentication data from the example with your own.

To work with tokens, you must have an account.

Admin#

Admin container launch#

Note. If you are not going to use the Admin service, do not launch this container.

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5010 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/admin:/srv/logs \
--name=luna-admin \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-admin:v.5.1.3

Monitoring data about the number of executed requests is saved in the luna-admin bucket of the InfluxDB. To enable data saving use the following command:

docker exec -it luna-admin python3 ./base_scripts/influx2_cli.py create_usage_task --luna-config http://127.0.0.1:5070/1

Backport 3#

The section describes launching of Backport 3 service.

Note. The service is not mandatory for utilizing LP5 and is required for emulation of LP 3 API only.

Backport 3 bucket creation#

Use the following command to create the "portraits" bucket for Backport 3:

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=portraits

Backport 3 DB tables creation#

Use the following command to create DB tables for Backport 3:

docker run \
-v /etc/localtime:/etc/localtime:ro  \
-v /tmp/logs/backport3:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport3:v.0.7.2 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Backport 3 container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5140 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--name=luna-backport3 \
--restart=always \
--detach=true \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/backport3:/srv/logs \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport3:v.0.7.2

User Interface 3#

The User Interface 3 is used with the Backport 3 service only.

User Interface 3 container launch#

Use the following command to launch the service:

docker run \
--env=PORT=4100 \
--env=LUNA_API_URL=http://127.0.0.1:5140 \
--name=luna-ui-3 \
--restart=always \
--detach=true \
--network=host \
-v /etc/localtime:/etc/localtime:ro \
dockerhub.visionlabs.ru/luna/luna3-ui:v.0.5.8

--env=LUNA_API_URL - specifies the URL of the Backport 3 service.

--env=PORT - specifies the port of the User Interface 3 service.

Backport 4#

The section describes launching of Backport 4 service.

Note. The service is not mandatory for utilizing LP5 and is required for emulation of LP 4 API only.

Backport 4 container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5130 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--name=luna-backport4 \
--restart=always \
--detach=true \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/backport4:/srv/logs \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport4:v.1.3.2

User Interface 4#

The User Interface 4 is used with the Backport 4 service only.

User Interface 4 container launch#

Note. You should have the account with account type user before launching the User Interface 4 container. Its login and password in Base64 format will be used to work with the user interface.

Use the following command to launch the service:

docker run \
--env=PORT=4200 \
--env=LUNA_API_URL=http://<server_external_ip>:5130 \
--env=BASIC_AUTH=dXNlckBtYWlsLmNvbTpwYXNzd29yZA== \
--name=luna-ui-4 \
--restart=always \
--detach=true \
--network=host \
-v /etc/localtime:/etc/localtime:ro \
dockerhub.visionlabs.ru/luna/luna4-ui:v.0.1.1

--env=PORT - specifies the port for running User Interface 4.

--env=BASIC_AUTH - sets the Basic authorization for the account which data is displayed in the user interface. It is necessary to convert login:password created at the stage "Account creation using API service" to Base64 format. The account type should be set to user.

--env=LUNA_API_URL - specifies the URL of the Backport 4 service.

You should use the external IP of the service, not localhost.
You should specify the Backport 4 service port (5130 is set by default).