Skip to content

Before upgrade#

Make sure that you are the root user before upgrade!

Before upgrading the LUNA PLATFORM, you must perform the following actions:

  1. Introduce yourself with accounts migration notes
  2. Create backups
  3. Delete old symbolic link
  4. Unpack the distribution of the new version of LUNA PLATFORM
  5. Create new symbolic link
  6. Change group and owner for new directories
  7. Configure SELinux and Firewall if not previously configured
  8. Create log directories for new services, if logging to a file was previously used
  9. Perform license activation steps
  10. Install Docker
  11. Set up GPU computing if you plan to use GPU
  12. Login to VisionLabs registry if authorization was not previously performed
  13. Remove LUNA PLATFORM 4 containers

Accounts migration notes#

All accounts created using the Admin service will be automatically migrated. The administrator account will be assigned the type "admin", and accounts created by requesting the resource "/accounts" will be assigned the type "advanced_user". The email address will be used as login and password. The name of the organization will be written in the "description" field.

Old account New account
Organization name: VisionLabs login: example@visionlabs.ai
E-mail address: example@visionlabs.ai password: example@visionlabs.ai
Account id: e8531a5b-a429-4980-8d04-b38d8c220409 description: VisionLabs
account_id: e8531a5b-a429-4980-8d04-b38d8c220409
account_type: admin

In order to retain the ability to use the data created earlier by specifying the "account_id" in the "Luna-Account-Id" header, it is necessary in the "account creation" request specify "login", "password", "account_type" and the old identifier "account_id" in the "Luna-Account-Id" header of the request. Thus, the old "account_id" will be linked to the account being created.

Examples of linking account and creating new account are given in the "Account creation using API service" section.

Backups creation#

Create backups for all the databases used with LUNA PLATFORM before performing the migration procedures. You can restore your data if any problems occur during the migration.

It is recommended to create backups for Image Store buckets.

Backups creation for databases and buckets is not described in this document.

Go to the "luna" directory.

cd /var/lib/luna

Delete the "current" symbolic link.

rm -f current

Distribution unpacking#

The distribution package is an archive luna_v.5.38.3, where v.5.38.3 is a numerical identifier, describing the current LUNA PLATFORM version.

The archive includes configuration files, required for installation and exploitation. It does not include Docker images for the services. They should be downloaded from the Internet.

Move the distribution package to the directory on your server before the installation. For example, move the files to /root/ directory. The directory should not contain any other distribution or license files except the target ones.

Create directory for distribution file unpacking

mkdir -p /var/lib/luna

Move the distribution to the created directory

mv /root/luna_v.5.38.3.zip /var/lib/luna

Install the unzip archiver if it is necessary

yum install -y unzip

Go to the folder with distribution 

cd /var/lib/luna

Unzip files

unzip luna_v.5.38.3.zip

Create a symbolic link. The link indicates that the current version of the distribution file is used to run LUNA PLATFORM.

ln -s luna_v.5.38.3 current

Changing group and owner for directories#

LP services are launched inside the containers by the "luna" user. Therefore, it is required to set permissions for this user to use the mounted volumes.

Go to the LP "example-docker" directory:

cd /var/lib/luna/current/example-docker/

Set permissions for the user with UID 1001 and group 0 to use the mounted directories.

mkdir luna_configurator/used_dumps

chown -R 1001:0 luna_configurator/used_dumps

chown -R 1001:0 image_store

SELinux and Firewall#

You must configure SELinux and Firewall so that they do not block LUNA PLATFORM services.

SELinux and Firewall configurations are not described in this guide.

If SELinux and Firewall are not configured, the installation cannot be performed

Create log directory for new services#

Skip this section if no logs were previously stored on the server.

In the version of LUNA PLATFORM 5, new services have appeared for which you need to create directories with logs.

See "Logging to server" section if you have not previously used logging to a file, but want to enable it.

Following are the commands to create directories for all existing services. These commands will create and assign permissions only to missing directories.

mkdir -p /tmp/logs/configurator /tmp/logs/image-store /tmp/logs/accounts /tmp/logs/faces /tmp/logs/licenses /tmp/logs/events /tmp/logs/python-matcher /tmp/logs/handlers /tmp/logs/tasks /tmp/logs/tasks-worker /tmp/logs/sender /tmp/logs/api /tmp/logs/admin /tmp/logs/backport3 /tmp/logs/backport4

chown -R 1001:0 /tmp/logs/configurator /tmp/logs/image-store /tmp/logs/accounts /tmp/logs/faces /tmp/logs/licenses /tmp/logs/events /tmp/logs/python-matcher /tmp/logs/handlers /tmp/logs/tasks /tmp/logs/tasks-worker /tmp/logs/sender /tmp/logs/api /tmp/logs/admin /tmp/logs/backport3 /tmp/logs/backport4

If you need to use the Python Matcher Proxy service, then you need to additionally create the /tmp/logs/python-matcher-proxy directory and set its permissions.

License key activation#

The HASP service is used for LUNA PLATFORM licensing. Without a license, you will be unable to run and use LUNA services.

A HASP key is required to work with LUNA PLATFORM. It uses the haspvlib_x86_64_30147.so vendor library, which located in the in the "/var/hasplm/" directory.

License key is provided by VisionLabs separately upon request.

A network license is required to use LUNA PLATFORM in Docker containers.

The license key is created using the fingerprint. The fingerprint is created based on the information about hardware characteristics of the server. Therefore, the received license key will only work on the same server where the fingerprint was obtained.

There is a possibility that a new license key will be required when you perform any changes on the license server.

LP license includes the following features:

  • License expiration date.
  • Maximum number of faces with linked descriptors or basic attributes.
  • Liveness availability.
  • Liveness current balance.
  • Image check according to ISO/IEC 19794-5 standard availability.
  • Body parameters estimation availability.
  • Possibility of using the Index Matcher service in the LUNA Index Module.
  • Maximum number of streams created by the LUNA Streams service.

When ordering the license, you need to inform technical support about the need to use any of the above features.

Follow these steps to set up the license:

  1. Install HASP utility on your server. HASP utility is usually installed on a separate server;
  2. Start the HASP utility;
  3. Create the fingerprint of your server and send it to VisionLabs;
  4. Activate your key, received from VisionLabs;
  5. Specify your HASP server address in the Configurator settings before starting the Licenses container (see "Specify license server address using Configurator").

The Sentinel Keys tab of the user interface (<server_host_address>:1947) shows activated keys.

Install HASP utility#

LP uses HASP utility of a certain version.

If an older version of HASP utility is installed, it is required to delete it before installation of a new version. See Delete old LP hasp utility.

Go to the HASP directory.

cd /var/lib/luna/current/extras/hasp/

Install HASP utility on you server.

yum -y install /var/lib/luna/current/extras/hasp/aksusbd-*.rpm

Launch HASP utility.

systemctl daemon-reload

systemctl start aksusbd

systemctl enable aksusbd

systemctl status aksusbd

Configure HASP utility#

You can configure the HASP utility using the "/etc/hasplm/hasplm.ini" file.

Note! You do not need to perform this action if you already have the configured INI file for the HASP utility.

Delete the old file if necessary.

rm -rf /etc/hasplm/hasplm.ini

Copy the INI file with configurations. Its parameters are not described in this document.

cp /var/lib/luna/current/extras/hasp/hasplm.ini /etc/hasplm/

Add vendor library#

Copy LP vendor library (x32 and x64). This library is required for using LP license key.

cp /var/lib/luna/current/extras/hasp/haspvlib_30147.so /var/hasplm/

cp /var/lib/luna/current/extras/hasp/haspvlib_x86_64_30147.so /var/hasplm/

Restart the utility

systemctl restart aksusbd

Create fingerprint#

Go to the HASP directory.

cd /var/lib/luna/current/extras/hasp/licenseassist

Run the script 

./LicenseAssist fingerprint > fingerprint_30147.c2v

The fingerprint is saved to file "fingerprint_30147.c2v".

Send the file to VisionLabs. You license key will be created using this fingerprint.

You can also save the system fingerprint from the user interface at <host_address>:1947 by clicking the "Fingerprint" button on the "Sentinel Keys" tab.

Add license file manually using user interface#

  • Go to: <host_address>:1947 (if access is denied check your Firewall/ SELinux settings (the procedure is not described in this document);

  • Select the Update/Attach at the left pane;

  • Press the "Select File..." button and select a license file(s) in the appeared window;

  • Press the "Apply File" button.

Adding a license file
Adding a license file

Delete LP old hasp utility#

Note. Delete the HASP utility only if you need to install a newer version. Otherwise, skip this step.

Stop and disable the utility.

systemctl stop aksusbd

systemctl disable aksusbd

systemctl daemon-reload

yum -y remove aksusbd haspd

Docker installation#

The Docker installation is described in the official documentation:

https://docs.docker.com/engine/install/centos/.

You do not need to install Docker if you already have an installed Docker 20.10.8 on your server. Not guaranteed to work with higher versions of Docker.

Quick installation commands are listed below.

Check the official documentation for updates if you have any problems with the installation.

Install dependencies.

yum install -y yum-utils device-mapper-persistent-data lvm2

Add repository.

yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

Install Docker.

yum -y install docker-ce docker-ce-cli containerd.io

Launch Docker.

systemctl start docker

systemctl enable docker

Check Docker status.

systemctl status docker

Calculations using GPU#

You can use GPU for the general calculations performed by Handlers.

Skip this section if you are not going to utilize GPU for your calculations.

You need to install NVIDIA Container Toolkit to use GPU with Docker containers. The example of the installation is given below.

distribution=$(. /etc/os-release;echo $ID$VERSION_ID)

curl -s -L https://nvidia.github.io/nvidia-docker/$distribution/nvidia-docker.repo | tee /etc/yum.repos.d/nvidia-docker.repo

yum install -y nvidia-container-toolkit

systemctl restart docker

Check the NVIDIA Container toolkit operating by running a base CUDA container (this container is not provided in the LP distribution and should be downloaded from the Internet):

docker run --rm --gpus all nvidia/cuda:11.4-base nvidia-smi

See the documentation for additional information:

https://github.com/NVIDIA/nvidia-docker#centos-7x8x-docker-ce-rhel-7x8x-docker-ce-amazon-linux-12.

Attributes extraction on the GPU is engineered for maximum throughput. The input images are processed in batches. This reduces computation cost per image but does not provide the shortest latency per image.

GPU acceleration is designed for high load applications where request counts per second consistently reach thousands. It won’t be beneficial to use GPU acceleration in non-extensively loaded scenarios where latency matters.

Login to registry#

When launching containers, you should specify a link to the image required for the container launching. This image will be downloaded from the VisionLabs registry. Before that, you should login to the registry.

Login and password can be requested from the VisionLabs representative.

Enter login .

After running the command, you will be prompted for a password. Enter password.

In the docker login command, you can enter the login and password at the same time, but this does not guarantee security because the password can be seen in the command history.

Remove LUNA PLATFORM 4 containers#

Use the following command to stop and delete the default LUNA PLATFORM 4.5.3 containers.

You should remove all the containers of LUNA PLATFORM services if you have started a different number of containers or they have other names. 

docker container rm -f admin api sender tasks tasks-worker events luna-matcher luna-detector luna-extractor licenses faces_2 faces_1 image-store configurator influxdb

Note! It is also recommended to remove NGINX or edit its settings, as this instruction does not involve scaling using NGINX.

docker container rm -f nginx