Services launch#

This section gives examples for:

Databases tables migration
Buckets creation
Launching of containers

LUNA PLATFORM services must be launched in the following sequence:

Databases, Balancers, HASP service and other third-party party software
Configurator
Image Store
Accounts
Licenses
Faces
Events
Python Matcher
Python Matcher Proxy. The service is disabled by default.
Handlers
Tasks
Sender
API
Admin

The following service are used when emulation of LUNA PLATFORM 3 is required only:

The following service are used when emulation of LUNA PLATFORM 4 is required only:

It is recommended to launch containers one by one and wait for the container status to become "up" (use the docker ps command).

Some of these services are optional and you can disable their use. It is recommended to use Events, Tasks, Sender and Admin services by default. See the "Optional services usage" section for details.

When launching each service, certain parameters are used, for example, --detach, --network, etc. See the section "Launching parameters description" for more detailed information about all launch parameters of LUNA PLATFORM services and databases.

See the "Docker commands" section for details about working with containers.

Run third-party services#

This section describes the launching of databases and message queues in docker containers. They must be launched before LP services.

Monitoring configuration#

Monitoring LUNA PLATFORM services requires running the Influx 2.0.8-alpine database. Below are the commands to launch the InfluxDB container.

For more information, see the "Monitoring" section in the administrator manual.

If necessary, you can configure the visualization of monitoring data using the LUNA Dashboards service, which includes a configured Grafana data visualization system. In addition, you can launch the Grafana Loki tool for advanced work with logs. See the instructions for launching LUNA Dashboards and Grafana Loki in the "Monitoring and logs visualization using Grafana" section.

Migration from version 1#

If necessary, you can upgrade from the InfluxDB OSS 1 version.

The process of migrating InfluxDB from version 1 is not described in this documentation. InfluxDB provides built-in tools for migrating from version 1 to version 2. See the documentation:

https://docs.influxdata.com/influxdb/v2.0/upgrade/v1-to-v2/docker/

InfluxDB OSS 2#

Note. Make sure that the old InfluxDB container is deleted.

Use the docker run command with these parameters:

docker run \
-e DOCKER_INFLUXDB_INIT_MODE=setup \
-e DOCKER_INFLUXDB_INIT_BUCKET=luna_monitoring \
-e DOCKER_INFLUXDB_INIT_USERNAME=luna \
-e DOCKER_INFLUXDB_INIT_PASSWORD=password \
-e DOCKER_INFLUXDB_INIT_ORG=luna \
-e DOCKER_INFLUXDB_INIT_ADMIN_TOKEN=kofqt4Pfqjn6o0RBtMDQqVoJLgHoxxDUmmhiAZ7JS6VmEnrqZXQhxDhad8AX9tmiJH6CjM7Y1U8p5eSEocGzIA== \
-v /etc/localtime:/etc/localtime:ro \
-v /var/lib/luna/influx:/var/lib/influxdb2 \
--restart=always \
--detach=true \
--network=host \
--name influxdb \
dockerhub.visionlabs.ru/luna/influxdb:2.0.8-alpine

If you need to set the custom settings of the InfluxDB (for example, set the IP address and port when launching InfluxDB on separate server), then you need to change them in the configurations of each LUNA PLATFORM service. See the section "Set custom InfluxDB settings" for more information.

PostgreSQL#

Note. Make sure that the old PostgreSQL container is deleted.

Use the following command to launch PostgreSQL.

docker run \
--env=POSTGRES_USER=luna \
--env=POSTGRES_PASSWORD=luna \
--shm-size=1g \
-v /var/lib/luna/postgresql/data/:/var/lib/postgresql/data/ \
-v /var/lib/luna/current/example-docker/postgresql/entrypoint-initdb.d/:/docker-entrypoint-initdb.d/ \
-v /etc/localtime:/etc/localtime:ro \
--name=postgres \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/postgis-vlmatch:12

-v /var/lib/luna/current/example-docker/postgresql/entrypoint-initdb.d/:/docker-entrypoint-initdb.d/ \ - the "docker-entrypoint-initdb.d" script includes the commands for the creation of services databases. During database creation, a default username and password are automatically used.

-v /var/lib/luna/current/example-docker/postgresql/data/:/var/lib/postgresql/data/ - the volume command enables you to mount the "data" folder to the PostgreSQL container. The folder on the server and the folder in the container will be synchronized. The PostgreSQL data from the container will be saved to this directory.

--network=host - if you need to change the port for PotgreSQL, you should change this string to -p 5440:5432. Where the first port 5440 is the local port and 5432 is the port used inside the container.

You should create all the databases for LP services manually if you are going to use an already installed PostgreSQL.

Redis#

If you already have Redis installed, skip this step.

Use the following command to launch Redis.

docker run \
-v /etc/localtime:/etc/localtime:ro \
--name=redis \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/redis:7.0.5-alpine3.16

Configurator#

Optional services usage#

The listed below services are not mandatory for LP. You can disable them if their functionality is not required for your tasks.

Use the "ADDITIONAL_SERVICES_USAGE" section in the API service settings in the Configurator service to disable unnecessary services.

Optional services

Service	Dependent services
Events	API, Admin, Handlers, Tasks
Image Store	API, Admin, Handlers, Tasks
Tasks	API, Admin, Handlers
Sender	API, Admin, Handlers
Python Matcher Proxy (disabled by default)	API, Admin, Handlers, Tasks, Events

The API service does not depend on the state of the Admin, Backport3, Backport4, User Interface 3 and User Interface 4 services. These services do not need to be changed in the Configurator service, it is enough just not to launch them.

You can use the dump file provided in the distribution package to enable/disable services from the "Optional services" table before Configurator launch.

vi /var/lib/luna/current/extras/conf/platform_settings.json

You must restart a dependent service after changing its parameters if the service was already launched.

See the detailed information in the "Disableable services" section of the administrator manual.

Configurator database migration#

Migration from the previous LP build to LP build v.5.45.3 is described in this section.

The following instruction for Configurator DB migration assumes that you already have settings migration revision set in your database. This revision is set using the configs.migrate head script. This script is included in the installation manuals of LP, starting with build 5.1.1. If you have performed installation according to the manual, you do not need to perform additional actions.Settings migration will be performed automatically.

If there is no revision, you should recreate the database structure. See the LP 5 installation manual section "Configurator DB tables creation" for instructions. Then you should specify all the required settings manually.

The migration from version 5.1.0 is described in "LP_Docker_Upgrade_Manual.html" in the distribution package of version 5.1.1. You can update your Configurator database using this instruction and distribution package of version 5.1.1. Otherwise, you should recreate the database structure for the Configurator service and specify all the required settings manually. See the LP 5 installation manual section "Configurator DB tables creation" for instructions.

Migration from pre-release builds (builds before v.5.1.0) of LP is not provided. You should transfer all the required settings to the Configurator DB of 5.1.1 build manually.

When upgrading the Configurator service database with existing service configurations, a database structure migration must be performed, which will also migrate the saved settings of all LP services except the Configurator service configurations.

Note on migrating Configurator service settings is described in the next section.

Use the docker run command with these parameters to create the Configurator database tables.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /var/lib/luna/current/example-docker/luna_configurator/configs/luna_configurator_postgres.conf:/srv/luna_configurator/configs/config.conf \
--network=host \
-v /tmp/logs/configurator:/srv/logs \
--rm \
--entrypoint bash \
dockerhub.visionlabs.ru/luna/luna-configurator:v.2.1.29 \
-c "alembic upgrade head; cd /srv/luna_configurator/configs/configs/; python3 -m configs.migrate --config /srv/luna_configurator/configs/config.conf head;"

alembic upgrade head; - upgrades already existing database structure.

python3 -m configs.migrate head; - performs settings migrations in Configurator DB and sets revision for migration. The revision will be required during the upgrade to the new LP5 build.

Run Configurator container#

Note. Configurator service configurations are not automatically migrated, unlike all other service configurations. If the configurations of the Configurator service were changed in the previous version of LP and you need to save custom values, then in the command below you need to replace the path /var/lib/luna/current/example-docker/luna_configurator/configs/luna_configurator_postgres.conf with the path with a backup copy of the configurations Configurator service /var/lib/luna/BACKUP_luna_configurator_postgres.conf (see "Save user configurations of the Configurator" section).

Use the docker run command with these parameters to launch Configurator:

docker run \
--env=PORT=5070 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /var/lib/luna/current/example-docker/luna_configurator/configs/luna_configurator_postgres.conf:/srv/luna_configurator/configs/config.conf \
-v /tmp/logs/configurator:/srv/logs \
--name=luna-configurator \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-configurator:v.2.1.29

At this stage, you can activate logging to file if you need to save them on the server (see the "Logging to server" section).

Image Store#

Image Store container launch#

Note. If you are not going to use the Image Store service, do not launch this container and disable the service utilization in Configurator. See section "Optional services usage".

Use the following command to launch the Image Store service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5020 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /var/lib/luna/image_store/:/srv/local_storage/ \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/image-store:/srv/logs \
--name=luna-image-store \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-image-store:v.3.9.7

-v /var/lib/luna/image_store/:/srv/local_storage/ - the data from the specified folder is added to the Docker container when it is launched. All the data from the specified Docker container folder is saved to this directory.

If you already have a directory with LP buckets you should specify it instead of /var/lib/luna/image_store/.

Buckets creation#

Buckets are required to store data in Image Store. The Image Store service should be launched before the commands execution.

When upgrading from the previous version, it is recommended to launch the bucket creation commands one more time. Hence you make sure that all the required buckets were created.

If the error with code 13006 appears during launching of the listed above commands, the bucket is already created.

There are two ways to create buckets in LP.

Run the listed below scripts to create buckets.

Run this script to create general buckets:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/api:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-api:v.6.16.5 \
python3 ./base_scripts/lis_bucket_create.py -ii --luna-config http://localhost:5070/1

If you are going to use the Tasks service, use the following command to additionally create the "task-result" in the Image Store service:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.15.9 \
python3 ./base_scripts/lis_bucket_create.py -ii --luna-config http://localhost:5070/1

If you are going to use the portraits, use the following command to additionally create the "portraits".

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/api:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport3:v.0.8.8 \
python3 ./base_scripts/lis_bucket_create.py -ii --luna-config http://localhost:5070/1

Use direct requests to create required buckets.

The curl utility is required for the following requests.

The "visionlabs-samples" bucket is used for face samples storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-samples

The "portraits" bucket is used for portraits storage. The bucket is required for Backport 3 utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=portraits

The "visionlabs-bodies-samples" bucket is used for human bodies samples storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-bodies-samples

The "visionlabs-image-origin" bucket is used for source images storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-image-origin

The "visionlabs-objects" bucket is used for objects storage. The bucket is required for LP utilization.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=visionlabs-objects

The "task-result" bucket for the Tasks service. Do not use it if you are not going to use the Tasks service.

curl -X POST http://127.0.0.1:5020/1/buckets?bucket=task-result

Accounts#

Accounts DB tables creation#

Note. Accounts migration (upgrading from 5.2.0...5.28.0 only). Perform the steps below only if you are upgrading from LP 5.2.0...5.28.0, where the Admin service was not used. If you have used the Admin service before, skip this section and perform the steps in the "Accounts database migration" section.

Use the following command to create Accounts DB tables:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/accounts:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-accounts:v.0.1.12 \
python3 ./base_scripts/db_create.py --luna-config http://localhost:5070/1

Accounts database migration#

You need to execute migration scripts to update your Accounts database structure.

It is recommended to create the back up of your database before applying any changes.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/accounts:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-accounts:v.0.1.12 \
alembic -x luna-config=http://127.0.0.1:5070/1 upgrade head

In LUNA PLATFORM 5.30.0, the database that stores information about accounts has changed. In LUNA PLATFORM versions 5.2.0...5.28.0, information was stored in the Admin database (luna_admin database), and in versions 5.30.0 and higher, information is stored in the Accounts database (luna_accounts database). If you are upgrading from versions 5.2.0...5.28.0 to the current version, then the script above will transform the luna_admin database to work with new accounts (the database name will remain the same).

Accounts container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5170 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/accounts:/srv/logs \
--name=luna-accounts \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-accounts:v.0.1.12

Licenses#

Specify license settings using Configurator#

Follow the steps below to set the settings for HASP-key or Guardant-key.

Specify HASP license settings#

Note. Perform these actions only if the HASP key is used. See the "Specify Guardant license settings" section if the Guardant key is used.

To set the license server address, follow these steps:

go to the Configurator service interface http://<configurator_server_ip>:5070/
specify the "LICENSE_VENDOR" value in the "Setting name" field and click "Apply Filters"
set the IP address of the server with your HASP key in the field "server_address"
click "Save"

If the license is activated using the HASP key, then two parameters "vendor" and "server_address" must be specified. If you want to change the HASP protection to Guardant, then you need to add the "license_id" field.

Specify Guardant license settings#

Note. Perform these actions only if the Guardant key is used. See the "Specify HASP license settings" section if the HASP key is used.

To set the license server address, follow these steps:

go to the Configurator service interface http://<configurator_server_ip>:5070/
enter the value "LICENSE_VENDOR" in the "Setting name" field and click "Apply Filters"
set the IP address of the server with your Guardant key in the "server_address" field
set the license ID in the format 0x<your_license_id>, obtained in the section "Save license ID" in the License activation manual, in the "license_id" field
click "Save"

If the license is activated using the Guardant key, then three parameters "vendor", "server_address" and "license_id" must be specified. If you want to change the Guardant protection to HASP, then you need to delete the "license_id" field.

Licenses container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5120 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/licenses:/srv/logs \
--name=luna-licenses \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-licenses:v.0.7.6

Faces#

Faces database migration#

You need to execute migration scripts to update your Faces database structure.

It is recommended to create the back up of your database before applying any changes.

Run the following command to perform the Faces DB migration.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/faces:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-faces:v.4.8.12 \
alembic -x luna-config=http://127.0.0.1:5070/1 upgrade head

Faces container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5030 \
--env=WORKER_COUNT=2 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/faces:/srv/logs \
--name=luna-faces \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-faces:v.4.8.12

Events#

Events database migration#

You need to execute migration scripts to update your Events database structure.

It is recommended to create the back up of your database before applying any changes.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/events:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-events:v.4.8.12 \
alembic -x luna-config=http://127.0.0.1:5070/1 upgrade head

Events container launch#

Note. If you are not going to use the Events service, do not launch this container and disable the service utilization in Configurator. See section "Optional services usage".

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5040 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/events:/srv/logs \
--name=luna-events \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-events:v.4.8.12

Python Matcher services#

For matching tasks, you can use either only the Python Matcher service, or additionally use the Python Matcher Proxy service, which redirects matching requests to either the Python Matcher service or matching plugins. This section describes how to use Python Matcher without Python Matcher Proxy.

You need to use the Python Matcher Proxy service only if you are going to use matching plugins. Using Python Matcher Proxy and running the corresponding docker container are described in the "Use Python Matcher with Python Matcher Proxy" section.

See the description and usage of matching plugins in the administrator manual.

Use Python Matcher without Python Matcher Proxy#

The Python Matcher service with matching by the Faces DB is enabled by default after launching.

The Python Matcher service with matching by the Events is also enabled by default. You can disable it by specifying "USE_LUNA_EVENTS = 0" in the "ADDITIONAL_SERVICES_USAGE" settings of Configurator (see "Optional services usage" section). Thus, the Events service will not be used for LUNA PLATFORM.

The Python Matcher that matches using the matcher library is enabled when "CACHE_ENABLED" is set to "true" in the "DESCRIPTORS_CACHE" setting.

A single image is downloaded for the Python Matcher service and the Python Matcher Proxy service.

Python Matcher container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5100 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/python-matcher:/srv/logs \
--name=luna-python-matcher \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-python-matcher:v.1.6.3

Handlers#

Change the neural network model for extracting descriptors#

Note. If you are upgrading from LUNA PLATFORM 5.45.1 or the Handlers container contains models of neural networks specified in the settings "DEFAULT_HUMAN_DESCRIPTOR_VERSION" or "DEFAULT_FACE_DESCRIPTOR_VERSION", skip the steps below.

Transfer the neural network model requested from VisionLabs to the Handlers container or specify the necessary versions of descriptors in the settings "DEFAULT_HUMAN_DESCRIPTOR_VERSION" and "DEFAULT_FACE_DESCRIPTOR_VERSION" of the Handlers service in the Configurator (see section "Prepare to change the neural network version").

Handlers database migration#

You need to execute migration scripts to update your Handlers database structure.

It is recommended to create the back up of your database before applying any changes.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/handlers:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-handlers:v.2.19.4 \
alembic -x luna-config=http://127.0.0.1:5070/1 upgrade head

Handlers container launch#

You can run the Handlers service utilizing CPU (set by default) or GPU.

By default, the Handlers service is launched with all estimators and detectors enabled. If necessary, you can disable the use of some estimators or detectors when launching the Handlers container. Disabling unnecessary estimators enables you to save RAM or GPU memory, since when the Handlers service launches, the possibility of performing these estimates is checked and neural networks are loaded into memory. If you disable the estimator or detector, you can also remove its neural network from the Handlers container. See the "Enable/disable several estimators and detectors" section of the administrator manual for more information.

Run the Handlers service using one of the following commands according to the utilized processing unit.

Run Handlers utilizing CPU#

Use the following command to launch the Handlers service using CPU:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5090 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/handlers:/srv/logs \
--name=luna-handlers \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-handlers:v.2.19.4

Run Handlers utilizing GPU#

The Handlers service does not utilize GPU by default. If you are going to use the GPU, then you should enable its use for the Handlers service in the Configurator service.

If you need to use the GPU for all estimators and detectors at once, then you need to use the "global_device_class" parameter in the "LUNA_HANDLERS_RUNTIME_SETTINGS" section. All estimators and detectors will use the value of this parameter if the "device_class" parameter of their settings like "LUNA_HANDLERS__SETTINGS.runtime_settings" is set to "global" (by default for all estimators and detectors).

If you need to use the GPU for a specific estimator or detector, then you need to use the "device_class" parameter in sections like "LUNA_HANDLERS__SETTINGS.runtime_settings".

See section "Calculations using GPU" for additional requirements for GPU utilization.

Use the following command to launch the Handlers service using GPU:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5090 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--gpus device=0 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/handlers:/srv/logs \
--name=luna-handlers \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-handlers:v.2.19.4

--gpus device=0 - the parameter specifies the used GPU device and enables GPU utilization. A single GPU can be utilized per Handlers instance. Multiple GPU utilization per instance is not available.

Tasks#

Note. If you are not going to use the Tasks service, do not launch the Tasks container and the Tasks Worker container. Disable the service utilization in Configurator. See section "Optional services usage".

Tasks database migration#

You need to execute migration scripts to update your Tasks database structure.

It is recommended to create the back up of your database before applying any changes.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.15.9 \
alembic -x luna-config=http://127.0.0.1:5070/1 upgrade head

Tasks and Tasks Worker containers launch#

Tasks service image includes the Tasks service and the Tasks Worker. They both must be launched.

The "task-result" bucket should be created for the Tasks service before the service launch. The buckets creation is described in the "Buckets creation".

If it is necessary to use the Estimator task using a network disk, then you should first mount the directory with images from the network disk into special directories of Tasks and Tasks Worker containers. See the "Estimator task" section in the administrator manual for details.

Tasks Worker launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5051 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--env=SERVICE_TYPE="tasks_worker" \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks-worker:/srv/logs \
--name=luna-tasks-worker \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.15.9

Tasks launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5050 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/tasks:/srv/logs \
--name=luna-tasks \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-tasks:v.3.15.9

Sender#

Sender container launch#

Note. If you are not going to use the Sender service, do not launch this container and disable the service utilization in Configurator. See section "Optional services usage".

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5080 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/sender:/srv/logs \
--name=luna-sender \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-sender:v.2.6.12

API#

API container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5000 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--name=luna-api \
--restart=always \
--detach=true \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/api:/srv/logs \
--network=host \
dockerhub.visionlabs.ru/luna/luna-api:v.6.16.5

Account creation using API service#

The account is created using an HTTP request to the "create account" resource of the API service.

You can also create an account using the Admin service. This method requires an existing login and password (or the default login and password) and enables you to create an "admin" account. See the "Admin service" section of the administrator manual for details.

To create the account using a request to the API service, you need to provide the following mandatory data:

login — email address
password — password
account_type — account type ("user" or "advanced_user")

Create the account using your authentication details.

Note. Accounts migration (upgrading from 5.2.0...5.28.0 only). If you want to keep the ability to use the "account_id" that was used as the "Luna-Account-Id" header in versions 5.2.0...5.28.0 (without creating an account in the Admin service), then you need to link the old "account_id" to the account being created.

Example of CURL-request to the "create account" resource:

curl --location --request POST 'http://127.0.0.1:5000/6/accounts' \
--header 'Content-Type: application/json' \
--header 'Luna-Account-Id: <your_old_account_id>' \
--data '{
  "login": "user@mail.com",
  "password": "password",
  "account_type": "user",
  "description": "description"
}'

It is necessary to replace the authentication data from the example with your own.

To work with tokens, you must have an account.

Admin#

Admin container launch#

Note. If you are not going to use the Admin service, do not launch this container.

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5010 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/admin:/srv/logs \
--name=luna-admin \
--restart=always \
--detach=true \
--network=host \
dockerhub.visionlabs.ru/luna/luna-admin:v.5.2.9

Monitoring data about the number of executed requests is saved in the luna-admin bucket of the InfluxDB. To enable data saving use the following command:

docker exec -it luna-admin python3 ./base_scripts/influx2_cli.py create_usage_task --luna-config http://127.0.0.1:5070/1

Backport 3#

The section describes launching of Backport 3 service.

The service is not mandatory for utilizing LP5 and is required for emulation of LP 3 API only.

Backport 3 database migration#

You need to execute migration scripts to update your Backport 3 DB structure.

It is recommended to create the back up of your database before applying any changes.

Run the following command to perform the Backport 3 DB migration.

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/backport3:/srv/logs \
--rm \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport3:v.0.8.8 \
alembic -x luna-config=http://127.0.0.1:5070/1 upgrade head

Accounts and tokens migration#

Note. Accounts migration (upgrading from 5.2.0...5.28.0 only). Use the following command to migrate existing accounts and tokens from Backport 3 previous version:

docker run \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/backport3:/srv/logs \
--rm \
--network=host \
--entrypoint bash dockerhub.visionlabs.ru/luna/luna-backport3:v.0.8.8 -c "cd ./base_scripts/migrate_accounts/ && pip3 install -r requirements-postgres.txt && python3 ./run.py --backport_db_url postgres://luna:luna@127.0.0.1:5432/luna_backport3 --accounts_db_url postgres://luna:luna@127.0.0.1:5432/luna_admin"

python3 ./run.py - running the script for migrating accounts and tokens

--backport_db_url postgres://luna:luna@127.0.0.1:5432/luna_backport3 - luna_backport3 DB address flag

--accounts_db_url postgres://luna:luna@127.0.0.1:5432/luna_admin - luna_admin DB address flag

When migrating API and Faces service databases, all Backport 3 accounts will be migrated and stored in the database of the Accounts service. All migrated accounts will be of type "user". The fields "password", "email" and "organization_name" will be transferred from the "account" table of the Backport 3 database to the "account" table of the Accounts database under new names - "password", "login" and "description" respectively. Tokens will remain stored in the Backport3 database, but their identifier will also be entered in the Accounts database, where the necessary permissions will be automatically set.

Backport 3 container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5140 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--name=luna-backport3 \
--restart=always \
--detach=true \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/backport3:/srv/logs \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport3:v.0.8.8

User Interface 3#

The User Interface 3 is used with the Backport 3 service only.

User Interface 3 container launch#

Use the following command to launch the service:

docker run \
--env=PORT=4100 \
--env=LUNA_API_URL=http://127.0.0.1:5140 \
--name=luna-ui-3 \
--restart=always \
--detach=true \
--network=host \
-v /etc/localtime:/etc/localtime:ro \
dockerhub.visionlabs.ru/luna/luna3-ui:v.0.5.9

--env=LUNA_API_URL - specifies the URL of the Backport 3 service.

--env=PORT - specifies the port of the User Interface 3 service.

Backport 4#

The section describes launching of Backport 4 service.

The service is not mandatory for utilizing LP5 and is required for emulation of LP 4 API only.

Backport 4 container launch#

Use the following command to launch the service:

docker run \
--env=CONFIGURATOR_HOST=127.0.0.1 \
--env=CONFIGURATOR_PORT=5070 \
--env=PORT=5130 \
--env=WORKER_COUNT=1 \
--env=RELOAD_CONFIG=1 \
--env=RELOAD_CONFIG_INTERVAL=10 \
--name=luna-backport4 \
--restart=always \
--detach=true \
-v /etc/localtime:/etc/localtime:ro \
-v /tmp/logs/backport4:/srv/logs \
--network=host \
dockerhub.visionlabs.ru/luna/luna-backport4:v.1.3.12

User Interface 4#

The User Interface 4 is used with the Backport 4 service only.

User Interface 4 container launch#

Note. You should have the account with account type user before launching the User Interface 4 container. Its login and password in Base64 format will be used to work with the user interface.

Use the following command to launch the service:

docker run \
--env=PORT=4200 \
--env=LUNA_API_URL=http://<server_external_ip>:5130 \
--env=BASIC_AUTH=dXNlckBtYWlsLmNvbTpwYXNzd29yZA== \
--name=luna-ui-4 \
--restart=always \
--detach=true \
--network=host \
-v /etc/localtime:/etc/localtime:ro \
dockerhub.visionlabs.ru/luna/luna4-ui:v.0.1.5

--env=PORT - specifies the port for running User Interface 4.

--env=BASIC_AUTH - sets the Basic authorization for the account which data is displayed in the user interface.

--env=LUNA_API_URL - specifies the URL of the Backport 4 service.

You should use the external IP of the service, not localhost.
You should specify the Backport 4 service port (5130 is set by default).