Skip to content

Introduction#

This document provides examples of steps to update the environment using the Storage utility and then launch LUNA PLATFORM containers.

It is recommended to familiarize yourself with the Storages utility manual before deploying the LUNA PLATFORM.

This document includes an example of LUNA PLATFORM deployment. It implements LUNA PLATFORM minimum power operating for demonstration purposes and cannot be used for the production system.

Important: Updating using Storages is only possible for versions of LUNA PLATFORM v.5.46.1 and higher. If you are upgrading from an earlier version, use the normal upgrade manual to upgrade to the current version, or upgrade to v.5.46.1 and then use this manual.

Note that starting from versions 5.46.1, there may have been critical changes, such as updates to thresholds or neural network versions, deprecation of FaceDetV1 and FaceDetV2 detectors, and others (see the full list in the "Key changes from previous versions" section). A change such as updating the thresholds may give a different result when performing estimation than in the old build. This manual is for upgrading from a previous build and these commands are for advanced users only. These commands are marked accordingly. Be careful and do not perform unnecessary actions if you are updating from from LUNA PLATFORM v.5.76.4.

For LUNA PLATFORM upgrade, you need to perform the actions from the following sections:

The section "Additional information" provides useful information on the description of service launch parameters, Docker commands, using Grafana, etc.

This manual is designed with an assumption that:

  • You already have a previous minor version of LUNA PLATFORM installed and the required environment is up and running at your server(s).
  • LP 5 is installed according to LP 5 installation manual, and the default paths are used. Otherwise, you should consider your manual changes during the update.